Fortune

Fortunejpg

BACK

Manufacturer Name Fortune
Website http://www.ic-fortune.com/eng/index.asp
Location Taiwan
Special Focus Line Analog ICs
Part Number DescriptionFunctionApplicationPackageStatusSample
FS8820P-T With built-in N-MOSFET of low turn-on resistance.Reduction in Board Size due to Miniature Package TSSOP-8.Protection IC:Ultra-Low Quiescent Current at 3μA (Vcc=3.9V).Ultra-Low Overdischarge Current at 3μA (Vcc=2.0V).Overcharge Protection Voltage 4.28V ± 25mV.Overdischarge Protection Voltage 2.4V ± 100mV.Overcurrent Protection Voltage 150mV ± 15mV.Auto Recovery function.MOSFET:Rss(ON) < 49mΩ (VGS = 3.7V , ID = 1A).Battery ProtectionLithium Power Supply EquipmentTube/Reel/BulkActiveRequest
FS8601RA-D With built-in N-MOSFET of low turn-on resistance.Reduction in Board Size due to Miniature Package DFN-5.Protection IC:Ultra-Low Quiescent Current at 3μA (Vcc=3.9V).Ultra-Low Overdischarge Current at 3μA (Vcc=2.0V).Overcharge Protection Voltage 4.28V ± 25mV.Overdischarge Protection Voltage 2.4V ± 100mV.Overcurrent Protection Voltage 150mV ± 15mV.Auto Recovery function.MOSFET:Rss(ON) < 49mΩ (VGS = 3.7V , ID = 1A)Battery ProtectionLithium Power Supply EquipmentTube/Reel/BulkActiveRequest
FS8601HA-D • With built-in N-MOSFET of low turn-on resistance. • Reduction in Board Size due to Miniature Package DFN-5. • Protection IC: • Low supply current Normal Operation : 2.5μA typ. @VDD=3.9V Power-down mode : 0.05μA typ. @VDD=2.0V • Overcharge detection voltage﹝VOCU﹞ 4.2V~4.4V, Accuracy of 25mV • Overdischarge detection voltage﹝VODL﹞ 2.0V~2.8V, Accuracy of 100mV • Over current detection voltage﹝VOI1﹞ 0.10V~0.13 V, Accuracy of 10mV • Charger detection voltage -0.09 V • Wide supply voltage range 1.5 ~ 5.5V • 0V-Battery charging function • MOSFET: • Rss(ON) < 48mΩ (VGS = 3.5V , ID = 1A)Battery ProtectionLithium Power Supply EquipmentTube/Reel/BulkActiveRequest
DW01HA-x • With built-in N-MOSFET of low turn-on resistance. • Reduction in Board Size due to Miniature Package SOT-23-6, DFN-5. • Protection IC: • Ultra-Low Quiescent Current at 3μA (Vcc=3.9V). • Ultra-Low Overdischarge Current at 3μA (Vcc=2.0V. • Overcharge Protection Voltage 4.28V ± 25mV • Overdischarge Protection Voltage 2.4V ± 100mV • Overcurrent Protection Voltage 150mV ± 15mV • Auto Recovery function • MOSFET: • Rss(ON) < 55mΩ (VGS = 3.7V , ID = 1A)Battery ProtectionLithium Power Supply EquipmentTube/Reel/BulkActiveRequest
DW01MC-x • Built-in N-MOSFET of low turn-on resistance. • Reduction in Board Size due to Miniature Package TSSOP-8 or SOT-23-6 or DFN-5. • Protection IC: • Ultra-Low Quiescent Current at 3μA (Vcc=3.9V). • Overcharge Protection Voltage 4.3V ± 50mV • Overdischarge Protection Voltage 2.4V ± 100mV • Overcurrent Protection Voltage 150mV ± 30mV • Auto Recovery function • MOSFET: • Rss(ON) < 55mΩ (VGS = 3.7V , ID = 1A)Battery ProtectionLithium Power Supply EquipmentTube/Reel/BulkActiveRequest
DW01MC-xA • Built-in N-MOSFET of low turn-on resistance. • Reduction in Board Size due to Miniature Package TSSOP-8 or SOT-23-6 or DFN-5. • Protection IC: • Ultra-Low Quiescent Current at 3μA (Vcc=3.9V). • Overcharge Protection Voltage 4.28V ± 70mV • Overdischarge Protection Voltage 2.4V ± 100mV • Overcurrent Protection Voltage 150mV ± 30mV • Auto Recovery function • MOSFET: • Rss(ON) < 60mΩ (VGS = 3.7V , ID = 1A)Battery ProtectionLithium Power Supply EquipmentTube/Reel/BulkActiveRequest
DW01+G • Low supply current • Overcharge detection voltage: 4.300±0.050 V • Overcharge release voltage: 4.100±0.05 V • Over discharge detection voltage: 2.40±0.10 V • Over discharge release voltage: 3.00±0.10 V • Over current detection voltage: 150±30 mV • Short circuit detection voltage: 1.35 V • Delay time generated by the internal circuit • Charger detection voltage: -0.7 V • Reset resistor for over current protection: >500KΩ • Wide supply voltage range: 1.8 ~ 9.0 V • SOT-23-6 packageBattery ProtectionLithium Power Supply EquipmentTube/Reel/BulkActiveRequest
DW01-G • Reduction in Board Size due to Miniature Package SOT-23-6. • Ultra-Low Quiescent Current at 3μA (Vcc=3.9V). • Ultra-Low Power-Down Current at 0.1μA (Vcc=2.0V). • Precision Overcharge Protection Voltage 4.25V ± 50mV • Load Detection Function during Overcharge Mode. • Two Detection Levels for Overcurrent Protection. • Delay times are generated by internal circuits. No external capacitors required. Battery ProtectionLithium Power Supply EquipmentTube/Reel/BulkActiveRequest
DW01A-G • Low supply current • Overcharge detection voltage: 4.300±0.050 V • Overcharge release voltage: 4.100±0.05 V • Over discharge detection voltage: 2.40±0.10 V • Over discharge release voltage: 3.00±0.10 V • Over current detection voltage: 150±30 mV • Short circuit detection voltage: 1.35 V • Delay time generated by the internal circuit • Charger detection voltage: -0.7 V • Reset resistor for over current protection: >500KΩ • Wide supply voltage range: 1.8 ~ 9.0 V • SOT-23-6 packageBattery ProtectionLithium Power Supply EquipmentTube/Reel/BulkActiveRequest
DW01B-G • Low supply current • Overcharge detection voltage: 4.300±0.050 V • Overcharge release voltage: 4.100±0.05 V • Over discharge detection voltage: 2.40±0.10 V • Over discharge release voltage: 3.00±0.10 V • Over current detection voltage: 150±30 mV • Short circuit detection voltage: 1.35 V • Delay time generated by the internal circuit • Charger detection voltage: -0.7 V • Reset resistor for over current protection: >500KΩ • Wide supply voltage range: 1.8 ~ 9.0 V • SOT-23-6 packageBattery ProtectionLithium Power Supply EquipmentTube/Reel/BulkActiveRequest
DW01C-G • Reduction in Board Size due to Miniature Package SOT-23-6. • Ultra-Low Quiescent Current at 3μA (Vcc=3.9V). • Ultra-Low Power-Down Current at 0.1μA (Vcc=2.0V). • Precision Overcharge Protection Voltage 4.25V ± 50mV • Load Detection Function during Overcharge Mode. • Two Detection Levels for Overcurrent Protection. • Delay times are generated by internal circuits. No external capacitors required. Battery ProtectionLithium Power Supply EquipmentTube/Reel/BulkActiveRequest
DW01-P • Reduction in Board Size due to Miniature Package SOT-23-6. • Ultra-Low Quiescent Current at 3μA (Vcc=3.9V). • Ultra-Low Power-Down Current at 0.1μA (Vcc=2.0V). • Precision Overcharge Protection Voltage 4.28V ± 70mV • Load Detection Function during Overcharge Mode. • Two Detection Levels for Overcurrent Protection. • Delay times are generated by internal circuits. No external capacitors required. Battery ProtectionLithium Power Supply EquipmentTube/Reel/BulkActiveRequest
DW01H-G • Reduction in Board Size due to Miniature Package SOT-23-6. • Ultra-Low Quiescent Current at 2.5μA (Vcc=3.9V). • Ultra-Low Power-Down Current at 1.8μA (Vcc=2.0V). • Precision Overcharge Protection Voltage 4.28V ± 25mV • Load Detection Function during Overcharge Mode. • Two Detection Levels for Overcurrent Protection. • Delay times are generated by internal circuits. No external capacitors required. Battery ProtectionLithium Power Supply EquipmentTube/Reel/BulkActiveRequest
FS312F-G • Low supply current • Overcharge detection voltage: 4.25±0.025 V • Overcharge release voltage: 4.145±0.05 V • Over discharge detection voltage: 2.90±0.08 V • Over discharge release voltage: 3.0±0.08 V • Over current detection voltage: 150±30 mV • Short circuit detection voltage: 1.35 V • Delay time generated by the internal circuit • Charger detection voltage: -1.35 V • Reset resistor for over current protection: >500KΩ • Wide supply voltage range: 1.5 ~ 9.0 V • SOT-23-6 packageBattery ProtectionLithium Power Supply EquipmentTube/Reel/BulkActiveRequest
FS326E+G • Low supply current • Overcharge detection voltage: 4.30±0.04 V • Overcharge release voltage: 4.08±0.05 V • Over discharge detection voltage: 2.50±0.08 V • Over discharge release voltage: 2.90±0.08 V • Over current detection voltage: 150±30 mV • Short circuit detection voltage: 1.35 V • Delay time generated by the internal circuit • Charger detection voltage: -0.7 V • Reset resistor for over current protection: >500KΩ • Wide supply voltage range: 1.8 ~ 9.0 V • SOT-23-6 packageBattery ProtectionLithium Power Supply EquipmentTube/Reel/BulkActiveRequest
FS325A-G • Low supply current, Normal Operation : 2.5μA typ. @VDD=3.9V • Power-down mode : 0.05μA typ. @VDD=2.0V Auto recovery function : 1.8μA typ. @VDD=2.0V • Overcharge detection voltage﹝VOCU﹞ 4.2V~4.4V, Accuracy of 25mV • Overcharge release voltage﹝VOCR﹞ 3.8V~4.2V, Accuracy of 50mV • Overdischarge detection voltage﹝VODL﹞ 2.0V~2.8V, Accuracy of 100mV • Overdischarge release voltage﹝VODR﹞ 2.8V~3.2V, Accuracy of 100mV • Over current detection voltage﹝VOI1﹞ 0.10V~0.13 V, Accuracy of 10mV • Short circuit detection voltage﹝VOI2﹞ Fixed at 1.35V • Delay times are generated by an internal circuit. (External capacitors are unnecessary.) • Charger detection voltage -0.09 V • Reset resistance for Over current protection >150k • Wide supply voltage range 1.5 ~ 5.5V • Small package SOT-23-5 • 0V-Battery charging functionBattery ProtectionLithium Power Supply EquipmentTube/Reel/BulkActiveRequest
FS325B-G ‧ Low supply current, Normal Operation : 2.5μA typ. @VDD=3.9V ‧ Power-down mode : 0.05μA typ. @VDD=2.0V Auto recovery function : 1.8μA typ. @VDD=2.0V ‧ Overcharge detection voltage﹝VOCU﹞ 4.2V~4.4V, Accuracy of 25mV ‧ Overcharge release voltage﹝VOCR﹞ 3.8V~4.2V, Accuracy of 50mV ‧ Overdischarge detection voltage﹝VODL﹞ 2.0V~2.8V, Accuracy of 100mV ‧ Overdischarge release voltage﹝VODR﹞ 2.8V~3.2V, Accuracy of 100mV ‧ Over current detection voltage﹝VOI1﹞ 0.10V~0.13 V, Accuracy of 10mV ‧ Short circuit detection voltage﹝VOI2﹞ Fixed at 1.35V ‧ Delay times are generated by an internal circuit. (External capacitors are unnecessary.) ‧ Charger detection voltage -0.09 V ‧ Reset resistance for Over current protection >150k ‧ Wide supply voltage range 1.5 ~ 5.5V ‧ Small package SOT-23-5 ‧ 0V-Battery charging functionBattery ProtectionLithium Power Supply EquipmentTube/Reel/BulkActiveRequest
FS325C-G • Low supply current • Overcharge detection voltage: 4.30±0.04 V • Overcharge release voltage: 4.08±0.05 V • Over discharge detection voltage: 2.50±0.08 V • Over discharge release voltage: 2.9±0.08 V • Over current detection voltage: 150±30 mV • Short circuit detection voltage: 1.35 V • Delay time generated by the internal circuit • Charger detection voltage: -1.35 V • Reset resistor for over current protection: >500KΩ • Wide supply voltage range: 1.8 ~ 9.0 V • SOT-23-5 packageBattery ProtectionLithium Power Supply EquipmentTube/Reel/BulkActiveRequest
FS325D-G • Low supply current, Normal Operation : 2.5μA typ. @VDD=3.9V • Power-down mode : 0.05μA typ. @VDD=2.0V Auto recovery function : 1.8μA typ. @VDD=2.0V • Overcharge detection voltage﹝VOCU﹞ 4.2V~4.4V, Accuracy of 25mV • Overcharge release voltage﹝VOCR﹞ 3.8V~4.2V, Accuracy of 50mV • Overdischarge detection voltage﹝VODL﹞ 2.0V~2.8V, Accuracy of 100mV • Overdischarge release voltage﹝VODR﹞ 2.8V~3.2V, Accuracy of 100mV • Over current detection voltage﹝VOI1﹞ 0.10V~0.13 V, Accuracy of 10mV • Short circuit detection voltage﹝VOI2﹞ Fixed at 1.35V • Delay times are generated by an internal circuit. (External capacitors are unnecessary.) • Charger detection voltage -0.09 V • Reset resistance for Over current protection >150k • Wide supply voltage range 1.5 ~ 5.5V • Small package SOT-23-5 • 0V-Battery charging functionBattery ProtectionLithium Power Supply EquipmentTube/Reel/BulkActiveRequest
FS3332C-G • Low supply current Normal Operation : 7.5μA typ. 14.2μA max. Power-down mode : 0.3μA typ. • Overcharge detection voltage [VOCU] 3.90V~4.60V, Accuracy of ±25mV • Overcharge release voltage [VOCR] 3.60V~4.60V, Accuracy of ±50mV • Over-discharge detection voltage [VODL] 1.70V~2.60V, Accuracy of ±80mV • Over-discharge release voltage [VODR] 1.70V~3.80V, Accuracy of ±100mV • Over current detection voltage [VOI1] 0.07V~0.30V, Accuracy of ±20mV • Short circuit detection voltage [VOI2] Fixed at 1.0V • Delay times are set by an external capacitor. Each delay time for Overcharge detection, Over-discharge detection, Over-current detection are “Proportion of hundred of ten to one” • Two over-current detection levels (protection for short-circuit) • Internal auxiliary over voltage detection circuit (Fail safe for over voltage) • High-withstanding-voltage devices Absolute maximum rating: 18 V • Wide operating temperature range -40 to +85°C • Wide supply voltage range 2.0 ~ 16V • Pb free 8-pin TSSOP packageBattery ProtectionLithium Power Supply EquipmentTube/Reel/BulkActiveRequest
FS3871 Linear Charge Management IC for Lithium-ion and Lithium-PolymerBattery ChargerLithium Power Supply EquipmentTube/Reel/BulkActiveRequest
FS8205 • Low on-resistance • RDS(ON) = 27 mΩ MAX. (VGS = 4.5V, ID = 6A) • RDS(ON) = 36 mΩ MAX. (VGS = 2.5V, ID = 5A) • Common-drain typeBatttery MOSFETLithium Power Supply EquipmentTube/Reel/BulkActiveRequest
FS8205A • Low on-resistance • RDS(ON) = 27 mΩ MAX. (VGS = 4.5V, ID = 6A) • RDS(ON) = 35 mΩ MAX. (VGS = 2.5V, ID = 5A) • Common-drain typeBatttery MOSFETLithium Power Supply EquipmentTube/Reel/BulkActiveRequest
FS8820 • Low on-resistance • RDS(ON) = 24 mΩ MAX. (VGS = 4.5V, ID = 6A) • RDS(ON) = 32 mΩ MAX. (VGS = 2.5V, ID = 5A) • ESD Rating: ≧2000V HBMBatttery MOSFETLithium Power Supply EquipmentTube/Reel/BulkActiveRequest
FS8820S • Low on-resistance • RDS(ON) = 24 mΩ MAX. (VGS = 4.5V, ID = 6A) • RDS(ON) = 32 mΩ MAX. (VGS = 2.5V, ID = 5A) • Common-drain typeBatttery MOSFETLithium Power Supply EquipmentTube/Reel/BulkActiveRequest
FS8601R • Low on-resistance • RDS(ON) = 23 mΩ MAX. (VGS = 4.5V, ID = 4A) • RDS(ON) = 35 mΩ MAX. (VGS = 2.5V, ID = 2A) • ESD Rating: ≧2000V HBMBatttery MOSFETLithium Power Supply EquipmentTube/Reel/BulkActiveRequest
FS8844 • 2.0µA Quiescent Current (Typ.) • High accuracy of output voltage • ±2.0% : VOUT≧2.1 V • ±2.4% : VOUT≦2.0 V • Low Dropout: 550 mV @ IOUT=250mA (MIN.) • 250 mA Output • Thermal Overload Shutdown Protection • Output Short Circuit Protection • Stable Operation with Virtually Any Output Capacitor TypeLDO Linear Regulator ICPDATube/Reel/BulkActiveRequest
FS8855 • Low dropout voltage 650mV at 500mA (Typ.) • Up to ±35mV output voltage accuracy(VIN≦7.0V, VOUT≦3.5V) • Mask options from 1.5V to 5.0V • Quiescent current 30uA at 5V input(Typ.) • Small output capacitor • Output current limit • Thermal overload shutdown protectionLDO Linear Regulator ICCD-ROMTube/Reel/BulkActiveRequest
FS8860 • Low dropout voltage 700mV at 1.0A typ. • Adjustable output voltage (FS8860-Cx) or fixed output voltage (FS8860-xxCx) preset at 1.8V, 2.5V, or 3.3V • High output voltage accuracy • Fixed output voltage : ±35mV • Adjustable output voltage : ±50mV • Small output capacitor • Output current limit • Thermal overload shutdown protectionLDO Linear Regulator ICActive SCSI TerminatorsTube/Reel/BulkActiveRequest
FS8853 • Low dropout voltage 400mV at 300mA (Typ.) • Up to ±35mV output voltage accuracy (VIN≦7V) • Preset at 1.8V, 3.3V • Mask options from 1.5V to 5.0V • Quiescent current 30µA at 5V input (Typ.) • Small output capacitor • Output current limit • Thermal overload shutdown protectionLDO Linear Regulator ICBattery-Powered EquipmentTube/Reel/BulkActiveRequest
FS1117 • 1.4V maximum dropout at full load current • Fast transient response • Output current limiting • Built-in thermal shutdown • Good noise rejection • Low ESR Ceramic Capacitor(MlCC) Required gor Stability LDO Linear Regulator ICPC MotherboardTube/Reel/BulkActiveRequest
FS1084 • Input voltage up to 18V. • 1.5V maximum dropout at full load current • Fast transient response. • Output current limiting • Built-in thermal shutdown • Good noise rejection • 3-Terminal Adjustable or Fixed 1.8V, 3.3V • TO263-3L: ”Green”Molding Compound(no Br, Sb) • Lead Free Finish/RoHS compliant(Note 1)LDO Linear Regulator ICPC MotherboardTube/Reel/BulkActiveRequest
FS4422 • VDS = 30V • VGS = ± 20V • RDS(ON) = 15mΩ ( Max., VGS = 10V, ID=11A ) • RDS(ON) = 24mΩ ( Max., VGS = 4.5V, ID = 10A ) • ID = 11A ( TA = 25℃ ) • ID = 9.3A ( TA = 70℃ ) • Qg = 9.8nC ( VGS = 4.5V, ID=11A )LV MOSFETNotebookTube/Reel/BulkActiveRequest
FS4435 • VDS = - 30V • VGS = ± 25V • RDS(ON) = 25mΩ ( Max., VGS = - 10V, ID= - 10A ) • RDS(ON) = 36mΩ ( Max., VGS = - 5V, ID = - 5A ) • ID = - 10.5A ( TA = 25℃ ) • ID = - 8.0A ( TA = 75℃ )LV MOSFETNotebookTube/Reel/BulkActiveRequest
FS5908 Digital temperature sensor and Thermal watchdog with I2C Interface and SMBus TM FormatEnergy Metering ICPersonal Computers.Tube/Reel/BulkActiveRequest
FS7755 • High Accuracy, Surpasses 50/60 Hz IEC 687/1036 • Less than 0.1% Error over Dynamic Range of 500~1 • Synchronous outputs with CF, F1 and F2 • Single 5V Supply, Low Power ( 15mW Typical) • On-Chip Power Supply Monitoring • On-Chip Creep Protection • Proprietary ADCs and DSP Provide High Accuracy over Large Variations in Environmental Conditions and Time • Direct Drive for Electromechanical Counts and Two Phase Stepper Motors(F1 and F2) • A PGA Allows the Use of Small Value of Shunt and Burden Resistance Energy Metering ICTube/Reel/BulkActiveRequest
FS9721_LP1 • Maximum display: 4000 • Conversion rate: 3 times/sec • Two measurement modes ( auto / manual) • Power voltage range: 2.4V to 3.6V • Chip power consumption is less than 6mW • Low battery detection: 2.4V • 2.7KHz buzzer driver • Auto power-off: 15 mins • Unit symbol and backlight display • Sleeping mode current is less than 5uAMeasurementTube/Reel/BulkActiveRequest
FS9721_LP3 • Maximum display: 4000. • Conversion rate: 3 times/sec • RS232 serial data output • Power voltage range: 2.4V to 3.6V • Chip power consumption is less than 6mW • Low battery detection: 2.4V • 2.7KHz buzzer driver • Auto power-off: 30 mins • Unit symbol and backlight display • Sleeping mode current is less than 5uAMeasurementAuto/Manual Measurement Palm Digital MulTube/Reel/BulkActiveRequest
FS9721B • Maximum display: 2400. • Conversion rate: 3 times/sec • RS232 serial data output • Power voltage range: 2.4V to 3.6V • Chip power consumption is less than 6mW • Low battery detection: 2.4V • 2.7KHz buzzer driver • Auto power-off: 30 mins • Unit symbol and backlight display • Sleeping mode current is less than 5uAMeasurementAuto/Manual Measurement Palm Digital MulTube/Reel/BulkActiveRequest
FS98O24 (OTP Type) 8-bit MCU with 4k program EPROM,256-byte RAM,2 low noise OPAMP,DMM function network,1 14-bit ADC,4x20 LCD Driver and RTCMeasurementMeasuring Instruments.Tube/Reel/BulkActiveRequest
FS9922_DMM3 • Maximum display: 4000. • Conversion rate: 3 times/sec • RS232 serial data output (2400bps) • Two measurement modes ( auto / manual) • Power voltage range: 2.4V to 3.6V • Operating current is less than 2mA • Low battery detection: 2.4V • 2.7KHz buzzer driver • Auto power-off: 15 mins • Unit symbol and backlight display • Sleeping mode current is less than 10uAMeasurementAuto/Manual Measurement Palm Digital MulTube/Reel/BulkActiveRequest
FS9922_DMM4 • Maximum display: 6000 • Conversion rate: 3 times/sec • RS232 serial data output (2400bps) • Two measurement modes ( auto / manual) • Power voltage range: 2.4V to 3.6V • Operating current is less than 2mA • Low battery detection: 2.4V • 2.7KHz buzzer driver • Auto power-off: 15 mins • Unit symbol and backlight display • Sleeping mode current is less than 10uAMeasurementAuto/Manual Measurement Palm Digital MulTube/Reel/BulkActiveRequest
FS9952_LP1 • Maximum display: 1999 • Conversion rate: 3 times/sec • Two measurement modes(Auto/ Manual) • Power voltage range: 2.4V to 3.6V • Chip power consumption is less than 6mW • Low battery detection: 2.4V • 2.7KHz buzzer driver • Auto power-off : 15 mins • Peak value hold function • Unit symbol and backlight display • Sleeping mode current is less than 5uAMeasurementAuto/Manual Measurement Palm Digital MulTube/Reel/BulkActiveRequest
FS9952_LP2 2,000 counts auto range DMM ICMeasurementAuto/Manual Measurement Palm Digital MulTube/Reel/BulkActiveRequest
FS501 • 18-bit high-resolution 5Hz output rate • 12-bit 325Hz output rate • Embed crystal oscillation circuit • Chip current is less than 1.2mA • Power saving mode current is less than 1.2uA • 4-bit parallel port interface, can be directly connected to microprocessor I/O ports • Four programmable ADC direct input channelsMeasurementAuto/Manual Measurement Palm Digital MulTube/Reel/BulkActiveRequest
FS511 • Embed programmable GU ADC • 18-bit high-resolution 10Hz output rate • Linearity Error: 0.005%FS • Voltage operation ranges from 4.5V to 6V • Embed crystal oscillation circuit • Operation current is less than 1.2mA • Sleep mode current is about 1uA • Low Temperature coefficient: 10 ppm/J (Typical) • SPI interface to microprocessorMeasurementElectronic Weigh ScaleTube/Reel/BulkActiveRequest
FS970X • Built-in high resolution GU ADC • Good CMRR at 50/60 Hz • Low battery detection • Built-in crystal oscillation circuit • Operation current is less than 1.2mA • Standby saving mode current is less than 10uA • 2.5kHz beeper driver • 5,000 counts, high-resolution low-speed input, 5 times / sec. • 500 counts, low resolution, high-speed input, 640 times / sec. • Standard 4-bit parallel interface to directly connect to microprocessor ports • 4 programmable ADC direct input channelMeasurementDigital Multi-function MeterTube/Reel/BulkActiveRequest
FS9168-015 • 1.5V battery operation; operation current is less than 100gA, and sleep mode current is less than 1gA • Measurement range: +32.00 ~ +43.00XC, Accuracy 0.1XC, Resolution 0.01XC • Centigrade/Fahrenheit measurement selection • Alarm warning for fever • Highest temperature hold • Auto power off after 5 min • Memory function for last time measurement • Buzzer output frequency selection • Embedded low battery detection, 1.35V 0.05 VHealth Care ICDigital clinical thermometerTube/Reel/BulkActiveRequest
FS9168-017 • Display: 1/3 duty, 1/2 bias 3x13 LCD • 1.5V power supply; ?1gA(sleep mode) and ?60gA(normal operation) • Measurement period: 1 time/2 secs or 1 time/5 secs by option • Measurement range: -50J +300JF-58K +572K • Measurement resolution: 0.1J(-50J +200J; -4K +200K), and 1J(>+200J; +200K) • Measurement accuracy: ]1.5% rdg + 10d^ at -50.0J -20.0J, ]1% rdg + 10d^at -19.9J +199.9J, ]2% rdg + 2d^at +200J +300J • 4 functional buttons: ON/OFF, SELECT]J/K^, MIN/MAX, HOLD/ALARM • 8 minutes auto power-off with beep alarm • Over temperature alarm • Ambient temperature: 0J +50JHealth Care ICWide range thermometerTube/Reel/BulkActiveRequest
FS91M68-001 • 1.5V battery operation; operation current is less than 100gA, and sleep mode current is less than 1gA • Measurement range: +32.00 ~ +43.00XC, Accuracy 0.1XC, Resolution 0.01XC • Centigrade/Fahrenheit measurement selection • Alarm warning for fever • Highest temperature hold • Auto power off after 5 min • Memory function for last time measurement • Buzzer output frequency selection • Embedded low battery detection, 1.35V 0.05 VHealth Care ICDigital clinical thermometerTube/Reel/BulkActiveRequest
FS98M21(Mask Type) • 8-bit single chip microcontroller (MCU) • Embedded 2k x 16 bits program memory with one-time programmable (OTP) ROM • 128-byte data memory (SRAM) • Only 37 single word instructions to learn • 6-level memory stacks • 16-bit bi-directional I/O port • PDM (Pulse Density Modulator) output • Buzzer output • I2C serial I/O port (slave mode only) • 4 x 12 LCD drivers • One 6-channel 14-bit fully differential input analog to digital converter(ADC) • One low noise amplifier • 2 external InterruptsHealth Care ICSensor or Transducer measurement applicaTube/Reel/BulkActiveRequest
FS98O01 • 8-bit risk CPU core with 39 single word instructions • Embedded 2k x 16 program ROM (07ffH isnt usable by user), 128-byte data RAM • Instruction Programmer Function • Operating voltage is from 2.4V to 3.6V • Operating current is about 1.5mA; sleep current is about 2gA • Embedded internal 1MHz oscillator • 4-level hardware stacks • 3 Interrupt sources (external: input port 1<0>, internal: timer, ADC) • One 14-bit noise free ADC • Embedded voltage doubler and voltage regulator (3.6V regulated output) • 4-bit Input Port and 4-bit bi-directional I/O port including 1-bit for buzzer output • 4 x 12 LCD driver (3V peak-to-peak) • Watchdog timerHealth Care ICSimple portable tire gaugeTube/Reel/BulkActiveRequest
FS98O21 • 8-bit single chip microcontroller (MCU) • Embedded 2k x 16 bits program memory with one-time programmable (OTP) ROM • 128-byte data memory (SRAM) • Only 37 single word instructions to learn • 6-level memory stacks • 16-bit bi-directional I/O port • PDM (Pulse Density Modulator) output • Buzzer output • I2C serial I/O port (slave mode only) • 4 x 12 LCD drivers • One 6-channel 14-bit fully differential input analog to digital converter(ADC) • One low noise amplifier • 2 external InterruptsHealth Care ICElectronic kitchen scale, personal scaleTube/Reel/BulkActiveRequest
FS98O22 • 8-bit single chip microcontroller(MCU) • Embedded 4k x 16 bits program memory with one-time programmable (OTP) ROM • 256-byte data memory (SRAM) • Only 37 single word instructions to learn • 8-level memory stacks • 16-bit bi-directional I/O port • PDM (Pulse Density Modulator) output • Buzzer output • I2C serial I/O port (slave mode only) • 4 x 20 LCD drivers • One 8-channel 14-bit fully differential input analog to digital converter(ADC) • One low noise amplifierHealth Care ICElectronic kitchen scale, personal scaleTube/Reel/BulkActiveRequest
FS98O23 • 8-bit single chip microcontroller(MCU) • Embedded 8k x 16 bits program memory with one-time programmable (OTP) ROM • 384-byte data memory (SRAM) • Only 37 single word instructions to learn • 8-level memory stacks • 28-bit bi-directional I/O port • Two PDM (Pulse Density Modulator) output • Buzzer output • I2C serial I/O port (slave mode only) • 4 x 20 LCD drivers • One 12-channel 14-bit fully differential input analog to digital converter(ADC) • Two low noise amplifierHealth Care ICElectronic kitchen scale, personal scaleTube/Reel/BulkActiveRequest
FS98O25 • 8-bit single chip microcontroller(MCU) • Embedded 8k x 16 bits program memory with one-time programmable (OTP) ROM • 256-byte data memory (RAM) • Only 37 single word instructions to learn • 8-level memory stacks • 20-bit bi-directional I/O port • Two PDM (Pulse Density Modulator) output • Buzzer output • I2C serial I/O port (slave mode only) • 4 x 32 LCD drivers • One 8-channel 14-bit fully differential input analog to digital converter(ADC) • Two low noise amplifierHealth Care ICElectronic kitchen scale, personal scaleTube/Reel/BulkActiveRequest
FS98O02 • 8-bit RISC CPU core with 39 single word instructions. • Embedded 2k x 16 program ROM(07ffH isn’t usable by user), 128-byte data RAM. • Instruction Programmer Function. • Operating voltage is from 2.4V to 3.6V. • Operating current is about 1.5mA; sleep current is about 2μA. • Embedded internal 1MHz / 4MHz oscillator. • 4-level hardware stacks. • 3 Interrupt sources(external: input port 1<0>, internal: timer, ADC). • One 14-bit noise free ADC. • Embedded voltage regulator(2.5V / 3.6V regulated output). • Embedded Voltage Doubler(3V / 2xVDDP pumped output). • 4-bit Input Port and 8-bit bi-directional I/O port including 1-bit for buzzer output. • Embedded Low Voltage Reset(LVR)and Low Battery Detector(LBD). • 4 x 12 LCD driver(3V peak-to-peak). • Watchdog timer.Health Care ICSimple portable tire gaugeTube/Reel/BulkActiveRequest
FS9912R • 8-bit microcontroller, 37 single word instructions • Embedded 4k x 16 program memory, 128-byte data memory • Voltage operation ranges from 2.4V to 3.6V, 4MHz crystal oscillator • Operation current is less than 2mA, sleep mode current is about 1gA (LVR disable) • Low voltage reset (LVR) function mask option. FS9912R_nnnV LVR enable, FS9912_nnnV LVR disable • 8-level deep hardware stacks • 5 Interrupt sources (external: 2, internal: 3) • 8-channel 14-bit ADC (400mV input range, 2LSB linearity error) with 40Hz output rate • Embedded charge pumper and voltage regulator (4V regulated output) • Embedded bandgap voltage reference (typical 1.2V50mV, 100ppm/ XC) • Low noise (1gV Vpp without chopper, 0.5gV Vpp with chopper, 0.1Hz~1Hz) OPAMPs with chopper controller • 16-bit bidirectional I/O port and buzzer output • Dual 24-bit programmable timers • 4 x 16 LCD driver (3V Vpp) • Watchdog timerHealth Care ICSimple portable tire gaugeTube/Reel/BulkActiveRequest
FS91M68 • 8-bit microcontroller • Embedded 1k-word ROM and 64-byte RAM • 1.5V battery operation, with about 40μA (Typ.) operation current, and 0.2μA (Typ.) sleep mode current • One R2F (Resistance to Frequency) conversion module for sensor and reference resistors • One high-speed comparator and one 16-bit counter with programmable gate time select • Build-in voltage doubler for 1/3 duty, 1/2 bias 3×13 LCD driver • Input port:4-bit ; In / Out port:4-bit • Two buzzer outputs • Build in low battery detector (LVD) • Package:Dice form (36 pins), 44-pin LQFPHealth Care ICDigital clinical thermometerTube/Reel/BulkActiveRequest